Sunday, 4 August 2013

Sunday DIY: Hex Earrings (Marc Jacobs Inspired)

diy hex earrings 4

This hardware jewellery thing seems to be turning into a series of projects here at e-elise etc doesn't it? Despite the slight overload of this type of project I couldn't resist showing you these as they only take a minute to make and if, like me, you've already made other hardware jewellery pieces then you're bound to have a couple of leftover mini hex nuts to use up!

The inspiration from Marc by Marc Jacobs,  RRP around £45 a pair...
marc jacobs hex earring

To make them you will need - 2 mini hex nuts, 2 lengths of chain (approx 3" each), 2 earring wires, 2 small jump rings, jewellery pliers

Take one length of chain and thread on a hex nut. Next, use your pliers to open up a jump ring, hook both ends of the chain and an earring wire onto it and close...

That's all there is to it!

As always I'd love to hear from you if you try out this or any other project from my DIY Archives. If you have any DIY requests or challenges for me please leave them in the comments below.
© e-elise etc | All rights reserved.
Blogger Templates by pipdig